Bluetooth 2ch Stereo Audio Headset(V3.0+EDR) For iPhone, iPad, iPod Touch and More – Pink

Description

Charging the battery withMicroUSB cable

Step1: Insert USB charging cable into USB portwhich have support 5V power (such as AC/DC USB adapter or PC USB port)
Step2: Connect charging cabletothe charging port of headset.
When the red light is on, the headset isincharging.
When thebluelight ison, the headset isfullycharged.
It takes aboutalmost3 hours to charge the headset fully.

Warning:

The battery is rechargeable.
First time charging :first time charger battery ,please be sure the battery has been charged fullybeforeuse.

How to use

1) Switching on / off headset

Function
Operation
LED indicator
Voice prompt
Switch on
Press the MFB button for 3 seconds, and release it till the blue LED is on
Blue LED blink 3 times.
Power On
Switch off
Press the MFB button for 3 seconds, and release it till the red LED is on
Red LED blink 3 times
Power Off

Pairing the headset with Bluetooth devices

A.How to enter pairing mode

Function
Operation
LED indicator
Voice prompt
Enter pairing mode
Make sure the headset is off. Press and hold MFB button for6seconds, and release it till the red and blue LEDS blink alternately
Red and blue LED blink alternately.
Pairing

B. Pairing the headsetwith Bluetooth mobile phone

Please make sure your mobile phone has Bluetooth function that can be used.

Notes:Specific pairing procedures may vary with different mobile phone. Please refer to your mobile phone manual for further information. Steps as follows:

Please keep the headset and mobile phone in the range of 1 meter when pairing.
Make the headset enter into pairing mode (LED is red and blue blinking)
Start the Bluetooth function of mobile phone and searchfor newBluetooth devices.

After searched, select “LH-2013”in the Bluetooth device list.

According to indication, enter password or PIN No:”0000”, and press the key of” Yes” or “confirmed”.( it depends on the Bluetooth device setting )
After successful pairing, select “LH-2013″in the Bluetooth device list, and press “connect”.
Afterconnectsuccessfully, the blue LED of the headsetwill keep blinking.

Notes:

If the pairing is not successful, please switch off headset firstly, and then re-pairagain.
After pairing is successful, paired devices will remember each other. Unless pairing information is deleted because of new pairing, no need to pair when use next time. If you want to pair the headset with other devices, please pair it with the new device according to steps 1～6 mentioned above.
Multilink technology allows simultaneous connection to two different devices, just simply repeat the pairing process on both devices.
Although WIN7 is a superior operating systemwith most drivers already built-in, in some casesthis does not cover the various hardwareconfigurations built into the device (e.g. PC, Note book, Net book etc) from themanufacturer. In this case, please visit themanufacturer’s web site for the latest Bluetoothdrivers for your onboard Bluetooth device.

3) Re-connecting to a Bluetooth device

Automatic connecting

Every time the headset is switched on, it will connect to last connected device automatically, of course the source device Bluetooth must be on “on” states

Manual connecting to last connected HFP device

When the headset is in standby mode and doesn’t connect to any HFP devices, short pressMFBbuttononce, it will connect to last connectedsourcedevice automatically.

Notes:

– Before connecting to a Bluetooth device, please turn on the Bluetooth device’s Bluetooth function.

– On some Bluetooth devices, take some Nokia mobile phones for example, you have to allow automatic connecting in the mobile phone’s settings. Please refer to your mobile phone’s manual for further information.

4) Making calls with the headset

Function
Status of headset
Operation
Voice dial
Standby mode
Press and holdMFBbutton for1second, release it till hearing indication sound,then speak the call you want to.
Redial last number
Standby mode
Short press MFB twice quickly
Volume up
Conversation mode
Short press + key
Volume down
Conversation mode
Short press – key
Answer calling
Ringing
Short press MFB
Reject calling
Ringing
Press and hold MFB button for 1 second, and release until you hear indication sound